70m HDBaseT WallPlate Extender support 3D & IR

1>HD BaseT technology 2>North American standard 3>support 3D, 1080p, IR contorl 4>up to 70m 5>DC 5V

SX-EW11

Features: 1).Incorporates HD Base-T technology 2).Following North American wall plate standard(2 Gang indoor outlet) 3).Full HD support: 1080p@60Hz@48 b/pixels, 4Kx2K and support 3D 4).Extends HDMI and IR up to 328 feet (100 meters) using one CAT5e (or better) cable 5).With Infrared control signal passing through function 6).Supports high bit-rate audio formats (Dolby True-HD / DTS Master Audio) 7).Both inner and outer power connectors provided 8).UTP cable termination follows the standard of IEEE-568B 9).CEC Pass_Through 10).DC 5V power supply

Specification:

Operating Temperature Range	-5 to +35°C(+23 to +95°F)
Operating Humidity Range	5 to 90%RH (No Condensation)
Video Bandwidth	300MHz/9Gbps
Video Format Supported	Up to 1080P and 4Kx2k
Connectors	HDMI receptacle. RJ45 Power connector terminal  Power DC receptacle IR Blaster
Transmission Distance	1080P 328FT/100m over single CAT5E/6 cable
RJ45 Pin Confguration Reverse Polarity Sensitive Use EIA/TIA 568B, straight-through wiring.
Power supply	110-240V/ 5VDC power supply
Power Consumption	3Watts(TX),5Watts(RX)
Enclosure	ABS fire retardant plastic
Dimensions	W115.5xH114.5xT32.5mm
Weight	(TX)120g,(RX)120g
Gift box measurement	L280xW160xH92mm
Master carton measurement	L33.5xW29.5xH29.5cm   6PCS/BOX

Overview

  The HDMI wall plate extender kit allows HDMI equipment to be connected up to 328ft(100m) 

via one cat5e UTP cable in a point to point configuration at 1080p resolution.  The kit comes 

with one transmitter one receiver and two power supply.

70m HDBaseT WallPlate Extender support 3D & IR